
RUNI SK370 Screw Compactor - Compaction
The RUNI SK370 is our largest auger compactor, designed for large or continuous waste flows across a wide range of materials. Depending on the configuration, it can be used for foam materials such as EPS, EPP, EPE, XPS and PUR, as well as mineral wool, dust, packaging and other bulky waste materials.
RUNI SK370 Screw Compactor - Compaction
The RUNI SK370 is our largest auger compactor, designed for large or continuous waste flows across a wide range of materials. Depending on the configuration, it can be used for foam materials such as EPS, EPP, EPE, XPS and PUR, as well as mineral wool, dust, packaging and other bulky waste materials.
Compactor for Great Quantities of Trash
Materials You Can Compact with the SK370
EPS
Capacity: up to 200 kg/hour
Compacted density approx. 350 kg/m³
Compacted into stackable blocks
EPP
Capacity: 150-250 kg/hour
Compacted density: 400-600 kg/m³
Compacted into stackable blocks
XPS
Capacity: 150-250 kg/hour
Compacted density approx. 350 kg/m³
Compacted into stackable blocks
EPE
Capacity: 150-250 kg/hour
Compacted density: 600–750 kg/m³
Compacted into stackable blocks
PUR
Capacity: up to 200 kg/hour
Compacted density up to 350 kg/m³
The material is collected in bags rather than compacted into blocks.
Mineral wool
Capacity: up to 2.5 ton/hour
Compacted density: 600–700 kg/m³
Compacted into a dense, sand-like material and collected in big bags.
Dust and Airlaid
Capacity: 300-750 kg/hour
Compacted density: 350-800 kg/m³
Compacted into dense, but non-stackable blocks
Packaging and containers
Empty plastic and metal packaging can also be compacted with the SK370. For packaging containing liquids, see our dewatering solutions.
Other materials
Not sure if your material can be compacted? Reach out to us and we’ll find out together.
Capacity and compaction results depend on the material, bulk density, particle size and machine configuration.
Benefits of the SK370 Model:
- Larger screw, more power, more capacity
- Profit from converting waste to reusable material
- Reduce storage, transport and handling costs
- Save energy – no added heat required for most materials.
- Reduce manual handling
- Automatic start and stop for safe and simple operation
One Machine, Different Configurations
The right SK370 configuration depends on the material and how it is handled. Different materials can require different feeding systems, pre-crushers, outlets and handling of the compacted material.
The SK370 can, for example, be supplied with a 45° hopper for manual feeding, a vertical hopper for conveyor feeding or integrated below a silo. Depending on the application, the system can also include:
- Different pre-crusher configurations and motor sizes
- Heavy-duty pre-crusher for particularly tough or dense materials
- Silo solution
- Twin configuration with multiple screw compactors
- Automatic block divider and crane for block handling
- Melting unit for materials prone to re-expansion
- Remote access for easy troubleshooting and support
- Perforated matrix for dewatering wet materials
RUNI also develops and supplies customized solutions as required.
Compacting with the SK370
Depending on the application, the material is either fed directly into the screw or first shredded in a pre-crusher. The screw transports and compacts the material against the hydraulic jaws, which provide the required back pressure.
Sensors automatically start and stop the machine when material is present in the hopper, reducing the need for manual operation.
The compacted material can leave the machine in different forms depending on the application. Foam materials such as EPS are typically compacted into dense blocks, while materials such as mineral wool and PUR are collected in bags or big bags.
Warranty
As with the SK200 and SK240, we offer a 2-year warranty or 6,000 operating hours, whichever comes first for the machine.
RUNI SK120
Our smallest EPS compactor, suitable for retail and small industrial businesses. It has a capacity of approx. 18 kg per hour and is typically fed manually. It is recommended for an annual volume of less than 10 tons per year. It is available with either automatic or manual jaws.
Read more
RUNI SK200
Our second smallest compactor has a capacity of approximately 45 kg per hour and is typically fed manually. It is recommended for an annual volume of 10 to 30 tons. It is available with either automatic or manual jaws.
Read more
RUNI SK240 - Compaction
The RUNI SK240 screw compactor is the second largest in the RUNI range. It is capable of compacting a wide variety of materials, with capacity and output depending on the specific input.
Read more
RUNI SK240 - Separation
The SK240 is our smallest dewatering machine. Capacity and output depend on the application. The machine can dewater cans, plastic bottles, and Tetra Pak, as well as dry various wet fractions such as rejects and washed PE film.
Read moreCase Studies
At Dan-Web, the RUNI SK370 has made a significant difference – with tight compaction of dust and waste products from airlaid production, less maintenance, and lower transport costs.
Read more
With a RUNI SK370, Veglo Miljø presses paint residue out of paint buckets and compresses it at the same time. This results in significant savings, both in handling, transport, and landfill costs.
Read more
Every day, Morpol receives thousands of EPS boxes with fresh salmon and cooling ice. The boxes are used only once, and that’s why Morpol uses the RUNI SK370.
Read moreContact us
If you need more information or have questions about RUNI products, please fill out the form below. We will get back to you as soon as possible.
Read more about our privacy and cookie policy.


Contact US Office
+1 (630) 422-3172
runi-us@runirecycling.com
351 Country Club Drive,
Bensenville, IL 60106







